Motorhome & Caravan Habitation Service Includes:

Underbody

Corner steadies & folding steps (where applicable) – check operation & lubricate

Underslung tanks and pipes – check condition and security

 

Bodywork

Body panels

Door locks and hinges – check operation and lubricate

Body attachments – check security (including ladders, cycle racks, lockers, aerials, satellite,etc.)

Floor – check for delamination

Cab seat – check operation (swivel type or bed configuration only)

Furniture – check condition and operation (including hinges, stays, fridge catch, etc)

Window seals and blinds – check operation and condition

Rising roof – check operation (where applicable)

Damp test-carry out & note readings on a separate damp report sheet

 

Gas System (Fridge not serviced unless requested)       

Regulator – check performance

Carry out gas leak check

Pipe work & BBQ point – check operation & replace flexible hose and clips if necessary

Flame failure devices – check operation

LPG Tank/Cylinder – check security

Gas dispersal holes – check for blockage

Appliances, cooker – check flue and operation

Appliances, heating – check flue and operation

Appliances, water heater – check flue and operation

 

Ventilation

Ventilation openings – check for obstructions and free flow of air

Adjustable ventilators – check for function

Roof lights – check to ensure free of obstruction

 

Fire safety

 DIY additions – check condition & operation

Smoke & CO alarms – check operation

Extinguisher (if fitted) – check condition & operation

Fire blanket (if fitted) – check location and fixing

 

12V Electrics

Check that the leisure battery is being charged by the engine and mains charger

Fridge – check operation

Interior lighting & equipment – check operation

Leisure battery – checks security, electrolyte level & lubricate terminals (Full battery health check & print out)

Wiring earths & fuses – inspect condition & correct fuse rating

Electric awning & step – check condition & operation

External socket – check condition & operation

 

Mains Electrics

Inlet plug – inspect

Hook-up cable – check if available

Earth bonding – test

Metal surfaces bonded – check

RCD operation – test

Socket outlets & permanent connections – carry out visual & functional check

Appliances fitted e.g.: air conditioning – check operation

 

Water System

Water pump – check operation and clean grit filter

Pressure switch – check operation

Heater – check operation

Taps, microswitch & valves – check condition and operation

Pipes & tank – check condition and operation

Water filter & housing – check for leaks & replace filter if necessary

Waste system – check for leaks

Toilet – check seals, flush and blade operation

Drain down – unless advised not to

 

Appliances are checked for operation only,

Additional servicing may be required for warranty purposes.

 

Work has been carried out in accordance with the latest Standard Working Procedures

 

Leave Comment